Specification of Topog-E® steam gaskets E180 3mm
Topog-E® steam gaskets E180 3mm
Description Topog-E® Series 180 molded rubber gaskets have been used successfully worldwide for over 40 years (mostly based on their previous designation as Topog-E® steam gaskets).
They are manufactured by the Topog-E® Gasket Company in Oklahoma, USA, using a specially formulated elastomeric compound.
The complete range of Topog-E® Series 180 molded gaskets is supplied throughout Europe through the James Walker company and a network of authorized distributors. Typical applications Gaskets for handholes and manholes are in pressure vessels of all types, including: boilers, hot water vessels, humidifiers and steam hobs, refrigeration plants, mixing tanks, compressed air tanks, water purifiers, water softeners and water towers. Key features Cost-effective sealing device for inspection of openings in many industrial pressure vessels and tanks. According to the topography of the mating surface.
Withstands full, continuous and cycling boiler operating pressure. Withstand continuous exposure to water treatment chemicals.
Simple to install, and to remove without chiseling or buffing.
Capability and service life Steam pressure vessel: a typical maximum operating pressure of 12bar and a saturated steam temperature of 193°C, for an average service life of one year. Other applications (eg, condensate, water and air vessels): these gaskets are sometimes used at pressures above 14bar where the temperature is moderate - for example, below 121C. Under less severe conditions (eg water at ambient temperature), these gaskets can provide an extremely long service life. Sheet Gasket
